News about the state and prospects of the defense industry
Su-57 aircraft are planned to be equipped with airframe condition monitoring sensors from 2024
The control system can begin to be installed on fighters from 2024
The system for monitoring the technical condition of the aircraft in real time is planned to be installed on Su-57 fighters from 2024.
Source: The Mi-28N helicopter will be armed with upgraded guided missiles "Whirlwind-1"
The prototype, armed with the complex, is undergoing factory tests, the interlocutor of TASS noted
The upgraded anti-tank guided missiles (ATGM) "Whirlwind-1"will be part of the armament of the Mi-28N attack helicopter ("Night Hunter") produced by the Rostov plant" Rostvertol "(as part of the Russian Helicopters holding). This was reported to TASS by a source in the military-industrial complex.
The upgraded Adjutant complex will be able to simulate a swarm of drones
In April 2021, the cycle of state tests of the Adjutant was completed, preparations for mass production are underway, said Alexander Dushkin, a specialist of the Target Complexes project at the Kupol IEMZ.
The Amur Shipbuilding Plant intends to hand over the corvette "Sharp" ahead of schedule for four months - by the Victory Day
The Amur Shipbuilding Plant, part of the United Shipbuilding Corporation, plans to deliver one of the corvettes of the project 20380 - "Sharp" - to the Victory Day celebration in 2022, four months ahead of the contract deadline, the plant's general director Vladimir Kulakov told Prime Minister Mikhail Mishustin during his visit to the plant's completion pier.
KnAAZ has started working on the creation of the first prototype of the "Shekmate" fighter-materials for Mishustin's visit to the enterprise
The branch of the Sukhoi company "Komsomolsk - on-Amur Aviation Plant named after Gagarin" has started work on the creation of the first prototype of the new fighter "Checkmate".
SpaceX has built the hundredth "superior" RD-180 engine
The American SpaceX has completed the construction of the hundredth Raptor rocket engine, the space company reports on Twitter.
UEC will robotize the production of turbine disks by 2023
The director of production of the corporation Valery Teplov said that a modern site for the production of disks is being formed in the workshop No. 43 of the Moscow PC "Salyut"
The United Engine Corporation (UEC, part of the Rostec state Corporation) will robotize the section of turbine disks of aircraft engines by 2023. This was reported to TASS by the director of production of the corporation Valery Teplov.
The Checkmate fighter will be assembled at the aircraft factory in Komsomolsk-on-Amur
Russian Prime Minister Mikhail Mishustin visited the enterprise on July 28
The new Checkmate fifth-generation single-engine fighter will be assembled at the Gagarin Komsomolsk-on-Amur Aircraft Factory (KnAAZ), which is a branch of PJSC Sukhoi Company, said Yuri Slyusar, General Director of the United Aircraft Corporation.
Rostec creates the PD-8 engine using machine vision technology
UEC Production Director Valery Teplov noted that digital technologies will reduce the engine production time by half
The United Engine Corporation (UEC, as part of the Rostec State Corporation) is introducing computer vision technologies. This was reported to TASS by the director of production of the corporation Valery Teplov.
The Americans presented the concept of an intermediate carrier of air — to-air missiles
General Atomics has shown what a potentially revolutionary UAV carrier of air — to-air missiles can look like. Such devices will be launched from the carrier aircraft.
The exit of the Tesla truck was disrupted
The release of the Tesla Semi truck will be delayed until 2022. This is reported by the publication Business Insider. The failure of the start of production of an electric truck is associated with problems with the supply chain and limited availability of battery cells.
Not like in the movies: Russian pilots modeled the battle of the Su-75 and F-35
The Russian pilots told who will win in the battle between the Chekmat (Su-75) and the F-35.
I asked the pilots to conduct an imaginary battle between the promising light fighter Chekmat (Su-75) and the American F-35 KP.Ru.
Sukhoi fighters will be assembled in augmented reality
The Gagarin Aviation Plant in Komsomolsk-on-Amur has started working on a pilot project for assembling and painting aircraft and conducting technical control using Augmented reality (AR) technologies.
Miecznik: Will Polish frigates become a reality?
In the coming years, the Polish navy may arm itself with domestic frigates. July 27, portal defence24.pl He reported that Polish Defense Minister Mariusz Blaszczak signed a contract for the supply of three ships to the Polish Navy.
ESA told about the problems during the flight of the Nauka module to the ISS
During the flight of the Russian module "Science" to the International Space Station (ISS), several problems arose. On July 28, the European Space Agency (ESA) told about this, noting that now the nuances have been eliminated.
The Russian military conducted exercises near Kaliningrad with the deployment of Iskander complexes"
Calculations of operational-tactical missile systems (OTRK) "Iskander" have worked out the destruction of important objects of a conditional enemy during exercises in the Kaliningrad region, the press service of the Baltic Fleet (BF) reported on Wednesday.
Roscosmos published a photo taken from the Meteor-M satellite of forest fires in Yakutia
Smoke covers the region from the city of Mirny to the village of Ust-May and from Yakutsk to Aldan
TASS, July 28. Thick smoke is visible over Yakutia in a photo of forest fires taken from space by the Meteor-M satellite. The image was published on Twitter by Roscosmos.
Pontoon units for the first time built a double-width floating bridge
During a special exercise, the engineering troops of the Armed Forces of the Russian Federation provided the transfer of the group on the Oka River section in the Vladimir region.
"Aircraft Carrier Killer" for Taiwan Navy
Taiwan continues to strengthen its fleet. On July 28, the press service of the Ministry of Defense of Taiwan reported that the Navy of the Republic of China received the first serial corvette of the Tuo Chiang type.
Modern technologies allow you to turn any CNC machine into a hybrid 3D printer
Hybrid production systems allow you to simultaneously increase the shape using laser spraying, and remove excess by the traditional milling process. As a result, in one process, you can first create a rough blank, characteristic of additive manufacturing,and then bring it to perfection by processing parts on a CNC machine.